The three-chamber system for the windows with “euro” standard hardware groove. The depth of the frame is 60 mm and the depth of leaf is 68 mm. Due to the wider construction, in comparison to the PE 52, 24 mm fibreglass reinforced by polyamide strips and two-component central gasket guarantee high thermal parameters.
There is no need for a drip, what positively influences the beauty of the curtain wall, thanks to the modernization of the sealing elements.
The system allows to use the wide range of hardware and ease their installation. Three chamber-system Ponzio’s PE 60 permits to set up constructions of large dimensions. Glass thickness of 10-51 mm can be applied into the system as well as the arched constructions.
Characteristics of system:
- Close connection to other Ponzio systems
- The possibility of facing windows sashes (one plane outside)
- Glass thickness: 10-51 mm
- The possibility of using hi-tech two components EPDM gaskets with perfect thermal insulation. An aestetic appearance and an ease of assembly
- Many ways of making corner connections
- Bending profiles
|Aluminium profiles||EN AV-6060 according to PN-EN 573-3/ T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1|
|Thermal insulation||Heat penetration coefficient (for frame) Uf = 2,0 – 2,2 W/m2K|
|Fillings||Single or packet window panels with any kind of glass or opaque panels|
|Surface finishing||Powder coating with polyester on chromate undercoater accoording to Qualicoat standards, any RAL colour at choice; anodized in colours: natutal aluminium, olive, champagne, gold, old gold, brown – according to Qualanoad standards, lacquered for colour imitated wood|
|Gaskets||Synthetic caoutchouc EPDM according to DIN 7863 and standard according to DIN ISO 3302-1, E2|
|Connecting accessories||Corner joints, screws, tap bolts, washers made of aluminium or stainless or galvanized steel|
|Furniture||Renowned companies only: Fapim, Savio, Iseo, Cisa, Hautau, Geze, KFV, etc.|
|Permissions and quality certificates||Type tests according PN-EN 14351-1|