Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manualy or automaticaly operated), double acting and smoke hermetic doors. The PT 50 system allows to use the variety of fillings: glass, aluminium panels, „sandwich” fillings, panel boards and PVC with width 1 – 40 mm. The structural section depth for frame and sash is 52 – 60 mm. The regular doors or the coplanar doors can be assembled in the PT 50 system. The advantage of axial clamped hinges is an ease of assembly in three planes.

Характеристики системы:

  • Precise relation to other Ponzio systems (mutual corners, beadings, tools and hardware majority)
  • The possibility of facing window sashes (one plane outside) and doors (two planes outside and inside)
  • Bending profiles
  • The variety of door leaves: with wide beam or profiles cut at an angle of 45, with or without threshold

Техническая информация

Aluminium profiles EN AW-6060 according to PN-EN 573-3/T6 according to PN-EN 515:Al Mg Si 0,5 F22 according to DIN 1725 T1
Fillings Single or packet window panels with any kind of glass or opaque panels
Surface finishing Powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, old gold, brown — according to Qualanoad standards, lacquered for colour imitated wood
Gaskets Synthetic caoutchouc EPDM according to DIN7863 and standard according to DIN7715 E2
Connecting accessories Corner joints, screws, tap bolts, washers made of aluminium or stainless or galvanized steel
Furniture Renowned companies only: Fapim, Savio, Erreti, Iseo, Cisa, Hautau, Geze, etc.
Permissions and quality certificates Technical approval of Building Engineering Institute AT-15 5214/2012 “Inside smokeproof doors and general use and segments of division walls of PONZIO PT 50 system”. Smoke-control class Sa and Sm according to PN-EN 13501-2:2012